SCT100 Bench Digital Weight Transmitter/Indicator

• Easy to use 5-key waterproof keyboard
• Highly efficient red LED display with 6 20-mm digits and 6 LEDs for showing active functions
• Stainless steel protective case
• Frontal panel in alluminium, with protection gasket
• Dimensions 170 × 115 × 68 mm, fitted with support bracket (168 × 150 mm) for table or wall mounting
• Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS
• Up to 10.000e or multirange 2 × 3000e @ 0,3 μV/e in CE-M approved version for legal for trade use
• Up to 800.000 displayable divisions with internal resolution up to 3.000.000 points
• Up to 8 signal linearization points with DINITOOLS (3 from keypad)
• A/D 24-bit sigma-delta conversion, up to 400 conv./sec. autoselect
• Connectable with up to 8 analogue load cells with 350 Ohm input resistance
• Management of a digitally equalised 4-cell weighing system or management
  of 4 independent weighing systems
• From 12 Vdc to 24 Vdc power supply; 12Vdc power adapter included
  EU, UK, US, AU plugs included as standard

Transmitter/Indicator: Functions

THROUGH KEYBOARD:
Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by
SELECTABLE:
High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Formulation; Counting; In/Out Truck weighing; Hold e Peak
EXTERNAL INPUT:
Simulation of key pressure; Keyboard lock
MOSFET OUTPUT:
Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability
SERIAL PORTS:
On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds. DGT20 and DGT20AN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol
THROUGH 16 bit ANALOGUE OUTPUT (DGT20AN):
Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading)